Forum Index
 » 
User Forums
 » 
Applications
Problems with Samba Installation / MorphOS 3.2
  • Caterpillar
    Caterpillar
    frank
    Posts: 39 from 2013/6/30
    From: Gütersloh
    Hi, i have problems with the samba installation ...

    (I have no idea and I'm newbie ...)

    Samba Version 3.0.4 ->
    http://aminet.net/comm/tcp/samba-3.0.4-morphos.tgz

    MorphOS Version 3.2

    --- Readme ---


    Short installation notes:

    1. Unpack the archive into your amitcp: driectory, if you are running
    another tcpip stack make a assign to the directory of your choise.

    2. Add sbin/smbd and sbin/nmbd to your inetd.conf

    3. Edit the samba configuration file smb.conf placed in samba/lib.

    ---

    In the "inetd.conf" under Env-Archive/sys/net/ I have the entry

    netbios -ssn stream tcp nowait root NetWork:samba/bin/smbd smbd

    commented out ...


    ... what should I enter in the "inetd.conf" ?

    ... in which Directory must i copy the Samba Folder ?
  • »09.07.13 - 13:55
    Profile
  • jPV
  • Yokemate of Keyboards
    Yokemate of Keyboards
    jPV
    Posts: 2221 from 2003/2/24
    From: po-RNO
    I'd ask first do you really need full Samba installation? If you only want to mount remote shares, use SMBFS instead... installing whole Samba is a bit overkill in that situation.
    The wiki based MorphOS Library - Your starting point for MorphOS
    Software and other things made by me
  • »09.07.13 - 15:38
    Profile Visit Website
  • Caterpillar
    Caterpillar
    frank
    Posts: 39 from 2013/6/30
    From: Gütersloh
    I would like to share Files between my MosphOS Box and my OSX Computer use the SMB Protocol ...
  • »09.07.13 - 15:46
    Profile
  • Caterpillar
    Caterpillar
    frank
    Posts: 39 from 2013/6/30
    From: Gütersloh
    How do i install SMBFS on MorphOS 3.2 ... ?

    ... where can I download it ?


    Can I use it to copy data in both directions ?
  • »10.07.13 - 06:29
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12577 from 2003/5/22
    From: Germany
    > How do i install SMBFS on MorphOS 3.2 ... ? ... where can I download it ?

    https://morph.zone/modules/newbb_plus/viewtopic.php?forum=3&topic_id=6371&start=32
    https://morph.zone/modules/newbb_plus/viewtopic.php?forum=9&topic_id=7097&start=2
    https://morph.zone/modules/newbb_plus/viewtopic.php?forum=3&topic_id=8585&start=3

    > Can I use it to copy data in both directions ?

    Yes.
  • »10.07.13 - 06:57
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    Intuition
    Posts: 1116 from 2013/5/24
    From: Nederland
    Quote:

    frank wrote:
    How do i install SMBFS on MorphOS 3.2 ... ?

    ... where can I download it ?


    Can I use it to copy data in both directions ?


    http://www.amiga.org/forums/showpost.php?p=683287&postcount=2

    I recommend putting the smb statement in your s:network-startup with a 'wait 3' before it. You might need to experiment with the amount of waiting time to give the mossys:s/network-startup time to fully initialize the network connection.

    [ Edited by Intuition 10.07.2013 - 15:01 ]
    1.67GHz 15" PowerBook G4, 1GB RAM, 128MB Radeon 9700M Pro, 64GB SSD, MorphOS 3.15

    2.7GHz DP G5, 4GB RAM, 512MB Radeon X1950 Pro, 500GB SSHD, MorphOS 3.9
  • »10.07.13 - 11:57
    Profile
  • Caterpillar
    Caterpillar
    frank
    Posts: 39 from 2013/6/30
    From: Gütersloh
    Thank you to both, i will Test it ...
  • »10.07.13 - 12:16
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    Tom01
    Posts: 187 from 2009/9/20
    You don't put a wait in front of it.
    After the line ";Start services", the network is up.

    Copy smbfs to C: then put something like this into network-startup:

    RUN > NIL: STACK 50000 SMBFS VOLUME=PC: CACHE=1024 Workgroup=WORKGROUP User=username Password=password Service=//computername/SharedDocs

    Certainly the Pc has to be up and running for this line to succeed.
    You can also put that line into a text file, save an icon for it, set the S flag and start it when needed by a mouse click.
  • »17.07.13 - 20:33
    Profile Visit Website
  • Paladin of the Pegasos
    Paladin of the Pegasos
    Intuition
    Posts: 1116 from 2013/5/24
    From: Nederland
    Quote:

    Tom01 wrote:
    You don't put a wait in front of it.
    After the line ";Start services", the network is up.

    Copy smbfs to C: then put something like this into network-startup:

    RUN > NIL: STACK 50000 SMBFS VOLUME=PC: CACHE=1024 Workgroup=WORKGROUP User=username Password=password Service=//computername/SharedDocs

    Certainly the Pc has to be up and running for this line to succeed.
    You can also put that line into a text file, save an icon for it, set the S flag and start it when needed by a mouse click.


    Perhaps on your machines you don't have to put a wait but on mine one certainly has to.
    1.67GHz 15" PowerBook G4, 1GB RAM, 128MB Radeon 9700M Pro, 64GB SSD, MorphOS 3.15

    2.7GHz DP G5, 4GB RAM, 512MB Radeon X1950 Pro, 500GB SSHD, MorphOS 3.9
  • »17.07.13 - 21:16
    Profile