Forum Index
 » 
Developer Forums
 » 
Development
Search developer to activate BSDSOCKET in E-UAE
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    polluks
    Posts: 849 from 2007/10/23
    From: Gelsenkirchen,...
    If you want miamiDX, a native stack, you need a network card emulation, I suppose. Maybe you can try a serial PPP connection...
    Pegasos II G4: MorphOS 3.9, Zalman M220W · iMac G5 12,1 17", MorphOS 3.18
    Power Mac G3: OSX 10.3 · PowerBook 5,8: OSX 10.5, MorphOS 3.18
  • »30.03.20 - 19:43
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12577 from 2003/5/22
    From: Germany
    > it will be possible to port the standard Ethernet device of MorphOS for 68k ?

    What is the "standard Ethernet device of MorphOS"? In any case, for any Ethernet device driver to work from within UAE, UAE must emulate the respective Ethernet device.
  • »31.03.20 - 22:11
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Papiosaur
    Posts: 2628 from 2003/4/10
    From: France
    Hi Andreas_Wolf

    What is the "standard Ethernet device of MorphOS"?

    >sum_ethernet.device

    In any case, for any Ethernet device driver to work from within UAE, UAE must emulate the respective Ethernet device.

    i don't know...

    A wrapper 68k to use MorphOS TCP-IP should be possible not ?
    papio-software.com
    www.meta-morphos.org
    www.morphos-storage.net
  • »01.04.20 - 05:30
    Profile Visit Website
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12577 from 2003/5/22
    From: Germany
    >> What is the "standard Ethernet device of MorphOS"?

    > sum_ethernet.device

    I don't think this driver exists and I don't think there is such thing as a "standard Ethernet device". In case you mean the sungem_eth.device, this driver is for the specific Broadcom Ethernet controllers built into the MorphOS-supported PPC Macs. Apart from the fact that this driver is a closed-source PPC binary file (and even if compiled for m68k wouldn't necessarily work with any TCP/IP stack other than MorphOS NetStack), UAE would have to emulate one of the supported Broadcom Ethernet controllers, which of course it doesn't.

    > A wrapper 68k to use MorphOS TCP-IP should be possible not ?

    Yes, using the host system's TCP/IP stack with a specially built stub driver is what UAE does on the mainstream platforms. Someone would have to add this feature to the MorphOS version of E-UAE.
  • »01.04.20 - 07:19
    Profile
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    KennyR
    Posts: 903 from 2003/3/4
    From: #AmigaZeux, Gu...
    Quote:

    Papiosaur wrote:
    A wrapper 68k to use MorphOS TCP-IP should be possible not ?



    You already mentioned it - bsdsocket.library. Unfortunately E-UAE doesn't have this.

    E-UAE was really meant as a small UAE just to play games.
  • »01.04.20 - 19:43
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    Andreas_Wolf
    Posts: 12577 from 2003/5/22
    From: Germany
    > E-UAE was really meant as a small UAE just to play games.

    I'm not so sure about that. According to the original E-UAE author, it "attempts to bring many of the great features of WinUAE to non-Windows platforms" (a goal that was later forked into PUAE and is more recently targeted by FS-UAE). What you had in mind may be UAE4ALL, which also exists for MorphOS.
  • »02.04.20 - 05:18
    Profile