I need DC++/oDC, am I the only one?
  • Cocoon
    Cocoon
    ple3003
    Posts: 41 from 2003/4/7
    From: Åre - Sweden
    I share a lot. And i got to say DC is the only client i like. edonkey/emule/overnet is "ok". we got that too, through mldonkey. Bittorrent sucks. But hey, thats just my opinion. ;)
    DC++/oDC rox, and i want it ported to Morphos before I can dedicate 100% of my time to a Pegasos. But the thing is, I haven't seen a single topic about this anywhere...
    So, am I the only one? :(
    I eat people like you for breakfast  ;-)
  • »30.01.04 - 23:26
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    magnetic
    Posts: 2129 from 2003/3/1
    From: Los Angeles
    How do I get mldonkey working here? I'm behind a router firewall - a linksys BEFSR41 4 port swithcer/router... ?

    magnetic
    Pegasos 2 Rev 2B3 w/ Freescale 7447 "G4" @ 1ghz / 1gb Nanya Ram
    Quad Boot: MorphOS 2.7 | Amiga OS4.1 U4 | Ubuntu PPC GNU/Linux | OS X 10.4
  • »31.01.04 - 00:17
    Profile Visit Website
  • Moderator
    hooligan
    Posts: 1948 from 2003/2/23
    From: Lahti, Finland
    Whoaaaa there! BitTorrent sucks? If something sucks its DC/DC++.. or rather not DC/DC++, but the users. Worst bunch of whiners in the world.


    dc network in two lines:

    "can j00 openah a sL0t 4 meeh???? plz!! plz!"

    "no you can't? fu*k off!!!"
    www.mikseri.net/hooligan <- Free music
  • »31.01.04 - 01:24
    Profile Visit Website
  • Targhan
    Posts: 2833 from 2003/2/7
    From: USA
    :-/ Do HUH? I don't get it? :-/
    :idea:Targhan

    MorphOS portal? www.MorphZone.org
  • »31.01.04 - 03:36
    Profile Visit Website
  • Acolyte of the Butterfly
    Acolyte of the Butterfly
    Donar
    Posts: 142 from 2003/12/27
    From: Germany
    Quote:


    magnetic schrieb:
    How do I get mldonkey working here? I'm behind a router firewall - a linksys BEFSR41 4 port swithcer/router... ?

    magnetic



    In short:
    You have to look for something like Port forwarding
    or Virtual Server in the Router Setup Menu.
    There you must say that Port xy has to be forwarded to vour IP. For this you need an IP that is bound to your computer.

    If this is too short an answer try to figure out the ports that must be forwarded (TCP/UDP) and come back with that and if DHCP is on/off. Ill try to figure it out with you then.
    Unfortunately every router has different settings and names for the same thing, and not all routers have the menu point for port forwarding...
  • »31.01.04 - 06:24
    Profile