MorphZone

Pegasos II Won't Boot..

pan1k

# 1
Acolyte of the Butterfly

Posts: 147 from 2009/1/20

All of a sudden, my Pegasos II won't boot. I get no video output. The LED's in the case are on. I reseated the CPU card and RAM. Could it be a bad battery?
MacMini 1.5Ghz / Amiga 4000T Cyberstorm 060, 132MB RAM, Cybervision 64/3D, XSurf-III, MP3@64, Buddha Flash / Amiga 1200 GVP 030, Subway USB, 32MB RAM
»19.09.12 - 00:56

imax

# 2
Cocoon

Posts: 41 from 2004/9/20

From: Russia

My be battery.
Try replacing the memory and video at the exact working.
»19.09.12 - 02:51

itix

# 3
MorphOS Developer

Posts: 1520 from 2003/2/24

From: Finland

You could try serial cable to see firmware output.
1 + 1 = 3 with very large values of 1
»19.09.12 - 03:18

Amigaharry2

# 4
Paladin of the Pegasos

Posts: 1323 from 2010/1/6

From: EU-Austria (Wien)

I had the same problem some time ago - in my case the CPU-card has to be reworked ..... Do you have a another card to test?
Peg2, 3xPowerMac G5, 2xPowerbookG4, 2x MacMiniG4, Efika (again), A3000T and life is never boring.....
»19.09.12 - 05:29

zzd10h

# 5
Just looking around

Posts: 20 from 2012/1/10

I had, too, the same problem on my Peg2 after 1 week without switch-on it.
i just changed the motherboard battery and it was OK.

Hoping for you that it's just that.
»19.09.12 - 20:52

CountRaven

# 6
Priest of the Order of the Butterfly

Posts: 566 from 2007/12/10

From: Greece

Same symptoms as mine....

I had to go the hard way as it was not the battery...

My cpu and board are on their way to be fixed... but no one knows the final result.

I wish you all the best...

[ Edited by CountRaven 19.09.2012 - 23:01 ]
»19.09.12 - 20:59