Well i was trying my Cannon Printer last night, i had some problems.
First i tried printing a old amiga scene picture by Louie
I got the picture filled out on the hole A4 sheet.

Tried again and again with PicShow and FxPaintLite and with diffrent Options in printing, not mutch btw options in printing under eatch program.

Then i went under the System Settings and printer, here there where lots and lots of settings, tried editing a hole lot of GFXoptions. but did't really understand where i could get the printer resize picture.

oh well i thought and begun something else i was doing while doing that i really needed to get a guide on to some sheets, so i started CED and opened the document and choose Print File, printer started working and stopped after a sec. Resume light was flashing.... Nothing happend.

I pressed Resume button on printer, it ejected the sheet and stopped flashing on the resume button.
The sheet had 2 Lines, i tried again with multiview.
Same thing happend... Whats the problem here?

Is it the System Settings>Printer options???

plz reply, screenshots of your settings are most welcome.

X

try this: http://us2.aminet.net/driver/print/CanonDisk398d.lha
and dot't forget - you ought to have newest
parallel.device.Unfortunately support canon printers in turbo print is
poor.

@ XzIt

For best results, when you try to print pictures in any format and combination, you need the GraphicsPublisher from the TurboPrint 7.60 (or lower) package.

Visit my homepage, in particular this article, where you will also find some printer settings screenshots.

The screenshot and note named
'Ambient - "Settings/System settings..." menu - "Printer" icon - "Text" tab - "Text as Graphics" button'
should solve your CEd problem, too.

[ Edited by DoctorMorbius_FP on 2007/11/27 21:58 ]

hmmm, that seems a bit tricky.
i have a lokk tonight, hope i can find Ghistscript.....
could't find the link atm. :D

Hope i find it later.

X